|
|
|
|
|
|
|
Z-Tech Head & Neck Restraint for Auto Racing
Models: Series 4A and 6A - SFI 38.1 Certified
NEW Series 6A Model
The series 6A has new features never before seen in the head and neck restraint market. AVAILABLE MID-FEBRUARY - Pre-Order Now!
- Advanced Axis Adjustment allows you to adjust width, Arm angle, and Arm width. Fit different body shapes and sizes and adjusts to different race vehicles. Click here for setup instructions.
- Dual Compound Frame is lightweight and engineered for strength and dampening
- Stainless Steel Hardware screws and binary post built with high quality and strength to give long lasting strength
- Kevlar Webbing Tether connects helmet to restraint, while still allowing good side to side motion
- Spring Clip Quick Connect allows easy connect/removal from helmet with one hand
- Replaceable Padding washable/replaceable padding gives ease to clean and/or replace for continued comfort
- Helmet Hardware all hardware needed to connect included.
- SFI 38.1 Certified
- Affordably priced at $399.95 SALE $359.96 and free shipping from WORD Racing (free shipping to U.S. addresses only)
Z-Tech Series 6A
Click image to enlarge in pop-up window
(and see additional angles) |
Z-Tech Series 6A Head & Neck Restraint -- $399.95 SALE $359.96
*Free Shipping in the U.S.A.
*No sales tax
|
- SFI 38.1 Certified
- Wide range of adjustments - to fit a wide range of body types and vehicle types
- New Dual Compound Frame - Super Lightweight - approximately 925 grams
- Washable (and replaceable) padding
- Spring clip, easy one-handed quick connect
- Comes with helmet hardware
- Must be worn with racing harness, and racing seat with rear head rest (auto racing only, not intended for karting).
- Setup instructions
- Designed and assembled in the U.S.A.
|
NEW Series 4A Model
The series 4A has new features never before seen in the head and neck restraint market. These new patent pending features include:
- Advanced Axis Adjustment allows you to adjust width, Arm angle, and Arm width. Fit different body shapes and sizes and adjusts to different race vehicles. Click here for setup instructions.
- Dual Compound Frame is lightweight and engineered for strength and dampening
- Stainless Steel Hardware screws and binary post built with high quality and strength to give long lasting strength
- Kevlar Webbing Tether connects helmet to restraint, while still allowing good side to side motion
- Spring Clip Quick Connect allows easy connect/removal from helmet with one hand
- Replaceable Padding washable/replaceable padding gives ease to clean and/or replace for continued comfort
- Helmet Hardware all hardware needed to connect included.
- SFI 38.1 Certified
- Affordably priced at $354.95 SALE $319.46 and free shipping from WORD Racing (free shipping to U.S. addresses only)
Z-Tech Series 4A
Click image to enlarge in pop-up window
(and see additional angles) |
Z-Tech Series 4A Head & Neck Restraint -- $354.95 SALE $319.46
*Free Shipping in the U.S.A.
*No sales tax
|
- SFI 38.1 Certified
- Wide range of adjustments - to fit a wide range of body types and vehicle types
- New Dual Compound Frame - Super Lightweight - approximately 925 grams
- Washable (and replaceable) padding
- Spring clip, easy one-handed quick connect
- Comes with helmet hardware
- Must be worn with racing harness, and racing seat with rear head rest (auto racing only, not intended for karting).
- Setup instructions
- Designed and assembled in the U.S.A.
|
Model Shown Below to demonstrate packing: Original Series 1A - SFI 38.1 Certified. The new 4A model (above) has replaced the 1A model, please order above. Thank you.
|
|
|
